Make Any Microphone Wireless With The New Xvive XU3
The new XU3 from audio accessory company Xvive is an easy to use solution for wirelessly transmitting any audio signal. It can be used to turn any regular corded microphone into a wireless mic as well as for sending the signal from a DJ mixer to active speakers that can’t be easily reached using a cable.

The XU3 operates within the 2.4GHz ISM Band, an open band which does not require a licence to be used worldwide. It can broadcast on six channels, has less than 5ms latency and battery life of up to five hours. With a broad 20Hz - 20KHz frequency response, high resolution 24-bit/48kbps audio, operational range of 90ft and dynamic range of 110db, the XU3 is ideally suited for a wide range of audio applications.

With an elegant and simple to use design, the XU3 provides wireless transmission for all dynamic microphones and DI/outboard equipment with an XLR output, while the receiver can be used to collect the signal at either a mixing desk or active PA speaker. Battery life can be checked at a glance with the power status LED, protecting against battery outages during live performance and ensuring gigs run smoothly, each and every time. The XU3 transmitter and receiver can be charged with either the included USB cable or a USB wall adaptor, with the unit's full five hours of battery life obtained after a two and half hour charge.

Xvive is distributed exclusively in the UK and ROI by JHS. The XU3 is available now with a UK MSRP of £249. Look out for a detailed review in the next issue of Pro Mobile magazine (93 – Jan/Feb 2019).

Published: 29 November 2018