ADJ is pleased to announce that its compact and easily transportable Pro Event Table is now available with an elegantly understated matte black finish.
Designed as a professional alternative to banquet tables, the Pro Event Table MB can be used in a wide variety of situations, including to support sound, lighting or video control equipment, as a greeting or sales table, or as a DJ booth.
The Pro Event Table MB offers a sturdy, reliable and aesthetically pleasing alternative to rickety folding tables or stacks of flight cases. It provides a robust working surface, positioned at a convenient height of 34 inches, which is recessed within the front and side frames. This provides added protection for equipment and helps to obscure unsightly cables.
Not only does the Pro Event Table MB look great with its clean matte black finish, but it is also easily brandable. It features a central board that can be customised with a company logo or other event-specific branding. Its aluminium truss-style construction makes it lightweight but is also ideal for highlighting with wash lighting fixtures. Unlit, the event table will naturally blend in with its surroundings, providing an unobtrusive control position. Alternatively, with custom branding and lighting it can just as easily be made into the focal point of an event or stage set.
The unit’s shelf is covered in carpet, which provides a protective, non-slip surface for expensive equipment. It is also pre-cut with a central access slot that allows cables to run neatly from the shelf down under the table. It is the small details such as these, developed through extensive consultation with event professionals, which set the Pro Event Table MB apart as a truly professional solution.
Similar care has been taken in the structural design of the unit. It not only looks great and provides a solid working surface but also collapses down for easy transportation and is extremely easy to setup. The large front panel breaks apart into two sections, which minimises the space required to store and transport the table. Each piece of the front section is attached to a side piece via a hinge, which makes the structure quick and easy to erect. Shelf support bars then fit into slots on each side piece and are locked in place with thumb-tightening screws. Finally, the shelf slots in on top and the logo board screws into the front to complete the assembly process. With practice, the Pro Event Table MB can be erected by a single person in little more than a minute.
When erected, the unit has dimensions of 50” x 24” x 45.5” / 1270 x 610 x 1155mm (L x W x H), providing a significant amount of table space as well as a large brandable frontage. Thanks to its lightweight aluminium construction, the table weighs approximately 40lbs. (18kgs.), making it extremely convenient for mobile applications.
Offering a substantial working surface, the Pro Event Table MB is ideal for use at FOH for concerts, conferences and events. Whether supporting a sound desk, lighting console, or video mixer, this sturdy portable equipment stand puts controls at the right height for standing or sitting on a stool. With its sleek and eye-catching design, it also makes an ideal portable DJ booth for use at festivals, concerts and private parties. The possible uses of the Pro Event Table MB are even wider, going beyond technical setups. Its portable design and stylised looks make it ideal for use as a greeting counter on trade show booths or wedding shows and as a welcome table for conferences and meetings. Another potential application at conferences and tradeshows is an on-stage demonstration platform for cookery showcases and other practical presentations. It could even be used as a temporary bar for pop-up events and cocktail hours hosted in the open air.
“The original Pro Event Table, with its bright aluminium finish, remains a best-selling product that is used for a wide variety of professional event applications,” comments ADJ USA’s National Sales Manager, Alfred Gonzales. But when our customers requested the option of a subtle matte black finish, we were happy to oblige. The new Pro Event Table MB offers the same flexibility, stability and convenient collapsible design as the original but with an elegant matt black finish. It is ideal for blending into the background for functional applications, such as supporting lighting, video and audio control equipment, as well as being the centre of attention, for example when used as a DJ booth or greeting table.”
A range of accessories are also available that are compatible with the Pro Event Table MB. The PRO-ETBS is a custom-designed protective bag that not only makes it easy to carry all the components of the table together, but also keeps them clean during storage. The Pro-Shelf is a set of two aluminium shelves that sit on the front corners of the structure and provide useful platforms for additional equipment – for example moving heads when used as a DJ booth or wireless receivers when used as a sound desk. The PRO-ETSB and PRO-ETS are black and white scrim covers that are custom designed to fit the exact dimensions of the Pro Event Table MB. Finally, the Pro Event Ibeam is an overhead ‘goal post’ I-beam truss that fixes to the sides of the table and can be used to mount a wide variety of lighting fixtures, effects and accessories.
The Pro Event Table MB is available now from ADJ dealers and distributors worldwide.
To find out more about the ADJ Pro Event Table MB, visit:
https://www.adj.com/pro-event-table-mb
https://www.americandj.eu/en/pro-event-table-ii-mb.html
Published: 16 March 2021
Designed as a professional alternative to banquet tables, the Pro Event Table MB can be used in a wide variety of situations, including to support sound, lighting or video control equipment, as a greeting or sales table, or as a DJ booth.
The Pro Event Table MB offers a sturdy, reliable and aesthetically pleasing alternative to rickety folding tables or stacks of flight cases. It provides a robust working surface, positioned at a convenient height of 34 inches, which is recessed within the front and side frames. This provides added protection for equipment and helps to obscure unsightly cables.
Not only does the Pro Event Table MB look great with its clean matte black finish, but it is also easily brandable. It features a central board that can be customised with a company logo or other event-specific branding. Its aluminium truss-style construction makes it lightweight but is also ideal for highlighting with wash lighting fixtures. Unlit, the event table will naturally blend in with its surroundings, providing an unobtrusive control position. Alternatively, with custom branding and lighting it can just as easily be made into the focal point of an event or stage set.
The unit’s shelf is covered in carpet, which provides a protective, non-slip surface for expensive equipment. It is also pre-cut with a central access slot that allows cables to run neatly from the shelf down under the table. It is the small details such as these, developed through extensive consultation with event professionals, which set the Pro Event Table MB apart as a truly professional solution.
Similar care has been taken in the structural design of the unit. It not only looks great and provides a solid working surface but also collapses down for easy transportation and is extremely easy to setup. The large front panel breaks apart into two sections, which minimises the space required to store and transport the table. Each piece of the front section is attached to a side piece via a hinge, which makes the structure quick and easy to erect. Shelf support bars then fit into slots on each side piece and are locked in place with thumb-tightening screws. Finally, the shelf slots in on top and the logo board screws into the front to complete the assembly process. With practice, the Pro Event Table MB can be erected by a single person in little more than a minute.
When erected, the unit has dimensions of 50” x 24” x 45.5” / 1270 x 610 x 1155mm (L x W x H), providing a significant amount of table space as well as a large brandable frontage. Thanks to its lightweight aluminium construction, the table weighs approximately 40lbs. (18kgs.), making it extremely convenient for mobile applications.
Offering a substantial working surface, the Pro Event Table MB is ideal for use at FOH for concerts, conferences and events. Whether supporting a sound desk, lighting console, or video mixer, this sturdy portable equipment stand puts controls at the right height for standing or sitting on a stool. With its sleek and eye-catching design, it also makes an ideal portable DJ booth for use at festivals, concerts and private parties. The possible uses of the Pro Event Table MB are even wider, going beyond technical setups. Its portable design and stylised looks make it ideal for use as a greeting counter on trade show booths or wedding shows and as a welcome table for conferences and meetings. Another potential application at conferences and tradeshows is an on-stage demonstration platform for cookery showcases and other practical presentations. It could even be used as a temporary bar for pop-up events and cocktail hours hosted in the open air.
“The original Pro Event Table, with its bright aluminium finish, remains a best-selling product that is used for a wide variety of professional event applications,” comments ADJ USA’s National Sales Manager, Alfred Gonzales. But when our customers requested the option of a subtle matte black finish, we were happy to oblige. The new Pro Event Table MB offers the same flexibility, stability and convenient collapsible design as the original but with an elegant matt black finish. It is ideal for blending into the background for functional applications, such as supporting lighting, video and audio control equipment, as well as being the centre of attention, for example when used as a DJ booth or greeting table.”
A range of accessories are also available that are compatible with the Pro Event Table MB. The PRO-ETBS is a custom-designed protective bag that not only makes it easy to carry all the components of the table together, but also keeps them clean during storage. The Pro-Shelf is a set of two aluminium shelves that sit on the front corners of the structure and provide useful platforms for additional equipment – for example moving heads when used as a DJ booth or wireless receivers when used as a sound desk. The PRO-ETSB and PRO-ETS are black and white scrim covers that are custom designed to fit the exact dimensions of the Pro Event Table MB. Finally, the Pro Event Ibeam is an overhead ‘goal post’ I-beam truss that fixes to the sides of the table and can be used to mount a wide variety of lighting fixtures, effects and accessories.
The Pro Event Table MB is available now from ADJ dealers and distributors worldwide.
To find out more about the ADJ Pro Event Table MB, visit:
https://www.adj.com/pro-event-table-mb
https://www.americandj.eu/en/pro-event-table-ii-mb.html
Published: 16 March 2021
